SPECIFICATIONS

Brand Name: NoEnName_Null

Installation Type: Deck Mounted

Hign-concerned Chemical: none

Valve Core Material: Ceramic

Origin: Mainland China

Housing material: STAINLESS STEEL

Type: Basin Faucets

Surface Treatment: Electroplate

Type: Ceramic Plate Spool

Number of Handles: Single Handle

Hot & Cold Water: Yes

Style: Contemporary

Is Smart Device: no

Certification: none

Style: Single Holder Single Hole

Faucet Mount: Single Hole

Model Number: MPSLT

Choice: yes

Description

Working temperature: less than 60 degrees Celsius

Material: Stainless steel

Valve core type: ceramic disc valve core

Valve seat diameter: 30mm-35mm

Installation method: Deck Mounted

Opening method: wrench type

Inlet and outlet pipe diameter: 10mm

Surface technology: Electroplating

Applicable type: basin faucet

Style: Modern and minimalist

Operation method

1. Upward opening of handle can increase water discharge while downward opening of handle can cause decreased water discharge, finally closing

water flow.

2. After upward opening of handle, as a rule, leftward turning adjustment

can increase hot water supply and rightward turning adjustment can result in increased cold water supply. If hot and cold water pipe is conn- ected reversedly during installation, something opposite might happen compared to the above circumstances.

3.When the handle of triad faucet is opened upwardly, under normat con- dition water current flows out from the bubble former: Yieding water of spraying nozzle can be switched by pulling up tension lever head, then bubble former stops water flow.

4. During operating, it is only required to lightiy rotate the handle of switch moving at 90 C to specific position. Do not open and close with powerful strength to avoid the damage due to excessive overexertion.

5. Under low water source pressure, simpiy unscrew bubble former to take off inner throttling sheet for increasing faucet water discharge.When water pressure is normal, throttling sheet can be installed again.

6. After using this product for a period of time, all filter screens must be taken down to be washed before being installed again.

Maintenance and upkeep

In order to keep the brightness of faucet, please follow simple maintaining instructions below:

Rinse faucet with clean water;

Wipe and dry faucet with soft cotton cloth;

Do not any abrasive acidic shaggy detergent;

Do not clean faucet with polished abrading agent, soap, coarse cloth or paper handkerchief;

Regular cleaning of faucet can reduce the needs of large scale cleaning and polishing work.If large-scale cleaning work is needed, plsase follow the procedures below:

1. Try to clear surface dirt and dirty layer with clean water and soft cotton cloth;

2. Any kind of the following detergents can be used to clean surface dirty layer and stain;Mild liquid detergent;Colorless glass detergent;Mild nonacid non-abrasive liquid or completely soluble powdery deterent(mixing according to manufacturing instructions);Non-abrasive polishing liquid.

Note:

1.Due to manual measurement, please allow for dimensional errors!

2.Due to differences in shooting equipment, lighting, monitors, etc., there may be slight color differences, which are within the normal range. Please refer to the actual product for details!

3.This product does not come with a hose